Hướng dẫn sử dụng thiết bị labostart-pro-de

Hướng dẫn sử dụng thiết bị labostart-pro-de

LABOSTAR® PRO TWF ULTRA PURE WATER SYSTEM

FROM TAP WATER TO ULTRAPURE WATER– ONLY ONE INNOVATIVE STEP

The LaboStar® PRO TWF systems produce ultrapure water straight from your drinking water supply. This equipment incorporates a pre-filtration unit and a reverse osmosis membrane. The pure water collects in an integrated tank and is finally circulated through the polishing module by a circulation pump. The user can extract either Type III water from the built-in 7 l storage tank or Type I water from the dispenser with a quality of 0.055 µS/cm, equivalent to 18.2 MΩ-cm, and TOC of between 1 and 10 ppb, depending on the system type.
The RO water quality is displayed as well. The LaboStar PRO TWF equipment can cost-effectively produce small amounts of analytical-grade water. The water quality exceeds all relevant standards including ASTM Type I, CLSI and ISO 3696 Type I. System can be upgraded with 30 or 60 l storage tank.
A conductivity sensor constantly measures the product water purity in the recirculation loop. A positively charged 0.2 µm sterile filter at the dispenser removes bacteria and endotoxins, eliminating the need for an expensive ultra-filter. An uncharged 0.2 µm sterile filter is also available. LaboStar PRO TWF systems are delivered with the first set of modules and filters.

Benefits

• Upgrade with 30 or 60 l storage tank possible, manual dispense via tap
• Delivers two types of water: type III from the tank and type I from the dispenser
• Two different sterile filters available (with and without endotoxin retention)
• Easy module change due to quick-fit couplers
• Low acquisition costs
• Scope of supply includes consumables
• Made in Germany

Typical Applications LaboStar PRO TWF

• General analysis
• Standard buffer
• AAS, GC, IC, ICP
• Type III water
• QC Food Industry
• Pyrogen sensitive applications
• Cell and tissue culture

Typical Applications LaboStar PRO TWF UV

• Micro- und molecular biology
• PCR, HPLC
• TOC analysis
• Type III water

SPECIFICATIONS

* when sterile filter W3T199279 or W3T199209 is used (see accessories) with bubble point test: pressure > 50 psi/3.45 bar (with water) resp. 16 psi/1.10 bar (with 50% IPA)
** incl. charged sterile filter (the water was free of any detectable RNase or DNase)
*** with a pre-filter

RNase and DNase free water with the use of filter W3T199279 (RNase < 0.05 pg/ml; DNase < 10 pg/ml)

CONSUMABLES & ACCESSORIES

 
Hotline
024.3212.3709
Zalo
024.3212.3709
Viber
024.3212.3709
Youtube
Twitter
Facebook
http://facebook.com/
Facebook
http://facebook.com/
Instagram